科创中国

With the increasing noise pollution,low noise optimization of centrifugal pimps has become a hot topic.However,experimental study on this problem is unacceptable for industrial applications due to unsustainable cost.A hybrid method that couples computational fluid dynamics(CFD)with computational aeroacoustic software is used to predict the flow-induced noise of pumps in order to minimize the noise of centrifugal pumps in actual projects.Under Langthjem's assumption that the blade surface pressure is the main flow-induced acoustic source in centrifugal pumps,the blade surface pressure pulsation is considered in terms of the acoustical sources and simulated using CFX software.The pressure pulsation and noise distribution in the near-cutoff region are examined for the blade-passing frequency(BPF)noise,and the sound pressure level(SPL)reached peaks near the cutoff that corresponded with the pressure pulsation in this region.An experiment is performed to validate this prediction.Four hydrophones are fixed to the inlet and outlet ports of the test pump to measure the flow-induced noise from the four-port model.The simulation results for the noise are analyzed and compared with the experimental results.The variation in the calculated noise with changes in the flow agreed well with the experimental results.When the flow rate was increased,the SPL first decreased and reached the minimum near the best efficient point(BEP);it then increased when the flow rate was further increased.The numerical and experimental results confirmed that the BPF noise generated by a blade-rotating dipole roughly reflects the acoustic features of centrifugal pumps.The noise simulation method in current study has a good feasibility and suitability,which could be adopted in engineering design to predict and optimize the hydroacoustic behavior of centrifugal pumps.

水土流失的预测是开发建设项目水土保持方案的重要工作之一,也是难点之一.目前在方案编制中,受时间、实测条件和费用等限制,大部分的水土保持方案在进行水土流失预测时都采取工程类比法.类比法在应用于工程上时,有直观、快速的优点,但相对来说不够严谨,论据不够有力.本文探讨了运用类比法的五个标准,来确保类比的准确性,进而提高预测结果的可信性.

通过衡水市10年来的水质实测资料进行水质综合评价分析、研究,采用线性趋势检验法,选择衡水市浅层地下水的水质状况,对其污染严重区域、饮水型地方病区域的具有代表性的监测井进行取样分析.从饮用水源区的浅层地下水和深层地下水两个方面的水质状况,进行调查、研究,按照饮用水卫生标准评价,主要超标物质为氟化物.利用实测资料,对地下水主要污染物变化趋势进行分析,从总体上讲,氟化物、溶解性总固体、总硬度含量有增大的趋势;氯离子有下降的趋势;并提出了一些对策.

There have been various theoretical attempts by researchers worldwide to link up different scales of plasticity studies from the nano-, micro- and macro-scale of observation, based on molecular dynamics, crystal plasticity and continuum mechanics. Very few attempts, however, have been reported in ultra-precision machining studies. A mesoplasticity approach advocated by Lee and Yang is adopted by the authors and is successfully applied to studies of the micro-cutting mechanisms in ultra-precision machining. Traditionally, the shear angle in metal cutting, as well as the cutting force variation, can only be determined from cutting tests. In the pioneering work of the authors, the use of mesoplasticity theory enables prediction of the fluctuation of the shear angle and micro-cutting force, shear band formation, chip morphology in diamond turning and size effect in nano-indentation. These findings are verified by experiments. The mesoplasticity formulation opens up a new direction of studies to enable how the plastic behaviour of materials and their constitutive representations in deformation processing, such as machining can be predicted, assessed and deduced from the basic properties of the materials measurable at the microscale.