科创中国

抽汽压损是一种不明显的热力损失,使蒸汽的作功能力下降、热经济性降低.假定抽汽口的压力不变,加热器端差不变,分析抽汽压损变化对热力系统的影响.根据抽汽压损的理论分析和热力系统汽水分布方程建立抽汽压损对回热系统抽汽系数影响的数学模型,并结合炯平衡原理和小扰动理论建立抽汽压损对炯损分布的影响的数学模型.以某电厂N1000-25/600/600机组热力系统为例,在TRL工况下,定量计算热力系统炯损变化情况.根据定量计算结果定性分析了抽汽压损对热力系统的影响.

医用直线加速器是实现放疗的重要医疗设备,其机架、治疗头及治疗床等部件由于日常运行、老化和磨损而导致故障出现.分析探讨直线加速器设备常见故障产生的原因及处理的方法,合理的运用故障处理方法,对于排除设备故障具有积极的指导意义.

在某汽轮机除湿级的空心静叶上设计了不同的热蒸汽喷射缝,应用两相均质混合模型和湿蒸汽平衡相变模型,对具有缝隙的叶栅流场进行了全三维定常的数值计算.引入炯参数的方法进行能量转化过程的经济性评估.结果表明:尾缘喷射热蒸汽时,同一喷射流量下,缝隙宽度越大,炯有效效率越高.同时,在较大缝隙宽度下,有一个最佳的喷射流量,此时的炯有效效率最高.压力面中部喷射热蒸汽时,在喷射流量比小于6%下,各方案的[火用]有效效率均比无热蒸汽喷射的原型要高.同一喷射流量下,顺主流喷射且缝隙宽度越大,其[火用]有效效率越高.

In the field of aerospace, high-speed trains and automobile, etc, analysis of temperature filed and scuffing failure of tapered roller bearings are more important than ever, and the scuffing failure of elements of such rolling bearings under heavy load and high speed still cannot be effectively predicted yet. A simplified model of tapered roller bearings consisted of one inner raceway, one outer raceway and a tapered roller was established, in which the interaction of several heat sources is ignored. The contact mechanics model, temperature model and model of scuffing failure are synthesized, and the corresponding computer programs are developed to analyze the effects of bearings parameters, different material and operational conditions on thermal performance of bearings, and temperature distribution and the possibility of surface scuffing are obtained. The results show that load, speed, thermal conductivity and tapered roller materials influence temperature rise and scuffing failure of bearings. Ceramic material of tapered roller results in the decrease of scuffing possibility of bearings to a high extent than the conventional rolling bearing steel. Compared with bulk temperature, flash temperature on the surfaces of bearing elements has a little influence on maximum temperature rise of bearing elements. For the rolling bearings operated under high speed and heavy load, this paper proposes a method which can accurately calculate the possibility of scuffing failure of rolling bearings.

It is a common phenomenon that the cracks originating from a hole can cause structural damage in engineering.However,the fracture mechanics studies of hole edge crack problems are not sufficient.The problem of an elliptical hole with two collinear edge cracks of unequal length in an infinite plate under uniform tension at infinity is investigated.Based on the complex variable method,the analytical solutions of stress functions and stress intensity factors are provided.The stress distribution along the axes and the edge of the elliptical hole is given graphically.The numerical results show that there is obvious stress concentration near the hole and cracks,and the stresses tend to applied loads at distances far from the defect,which conform to Saint-Venant's principle.Hence,the stress functions are proved to be right.Under special conditions,the present configuration becomes the Griffith crack,two symmetrical cracks emanating from an elliptical hole,two cracks of unequal length emanating from a circular hole,a crack at the edge of a circular hole,or a crack emanating from an elliptical hole.Compared with available results,stress intensity factors for these special shapes of ellipses and cracks show good coincidence.The stress intensity factor for two cracks of unequal length at the edge of an elliptical hole increases with the crack length and the major-to-minor axis ratio of the elliptical hole.The stress distribution in an infinite plate containing an elliptic hole with unsymmetrical cracks is given for the first time.

黄骅市地处河北省东部平原,地表水资源利用能力低,浅层地下水水质差,长期依赖于开采深层地下水,造成地下水环境的破坏.通过准确把握黄骅市水资源特点,合理利用地表水,最大限度利用外来水,控制利用当地地下水,保证经济社会的可持续发展.

首先对物流配送及相关理论进行了综述,提出了共同配送模式在广西-东盟物流中的应用,同时,对广西现行的自营配送模式与共同配送模式进行了比较,并从成本、路线、经营主体等方面进行了定性、定量分析,由此,得出了自营配送模式存在成本高、路线不完善、经济主体单一等一系列问题,而共同配送模式更适合于广西物流发展的现状,并提出了共同配送的三种组织模式在广西物流应用中的优势和劣势.最后,提出了共同配送模式在广西物流配送应用中需要注意的问题及其对策.

河北省引黄输水工程是解决河北省水资源危机的有效措施.从1993年开始的引黄输水工程,为缓解河北省水资源紧张发挥了重要作用.通过对引黄输水水质监测结果分析,通过对8次引黄输水水质评价,在对所监测的项目中.有3次输水没有超标现象,有3次污染物的超标倍数小于或等于1,有2次超标倍数在1.2~2.8之间.从输水水质主要污染物分析,主要污染物为氨氮、挥发酚、总磷、总锰、总镉.根据对黄河水源水质资料分析,氮类污染和金属类污染主要受缓和黄河水源的影响,挥发酚、总磷污染主要受河道环境的污染.通过对引黄调水水质评价,受黄河水源和沿途河道的影响,引黄调水水质存在较大的不确定性.因此应加强对引黄调水水质的监测,为用水部门及时提供调水水质信息,以便制宰相席的用水方案.

水平衡测试是加强用水科学管理,最大限度地节约用水与合理用水的一项基础工作.解释了水平衡测试的定义及开展测试工作的依据,分析了水平衡测试参数之间关系,介绍了水平衡测试的方法,结合承德市中心医院水平衡测试实例,分析其用水现状,为制定用水定额和计划用水量指标,提供了较准确的基础数据,为今后节约用水提出了合理化的建议.

日本高度重视水源地保护及水生态修复,在水资源管理体制、法律法规体系建设、水资源开发利用、水源地保护、水生态修复、水污染事故应急处理、水科学研究治理、宣贯教育及公众参与等多个方面取得了先进经验和良好的效果.提出了从日本积极推行的水资源"五保体系",即"社会保水、政策机制保水、科技保水、工程保水、管理保水"中得到借鉴,加强我国在"保水教育、立法保护、污水治理、生态建设、政府主导、全民参与"等方面进行水源地保护及水生态修复工作的建议.