科创中国

In working state, the dynamic performance of dry gas seal, generated by the rotating end face with spiral grooves, is determined by the open force of gas film and leakage flow rate. Generally, the open force and the leakage flow rate can be obtained by finite element method, computational fluid dynamics method and experimental measurement method. However, it will take much time to carry out the above measurements and calculations. In this paper, the approximate model of parallel grooves based on the narrow groove theory is used to establish the dynamic equations of the gas film for the purpose of obtaining the dynamic parameters of gas film. The nonlinear differential equations of gas film model are solved by Runge-Kutta method and shooting method. The numerical values of the pressure profiles, leakage flux and opening force on the seal surface are integrated, and then compared to experimental data for the reliability of the numerical simulation. The results show that the numerical simulation curves are in good agreement with experimental values. Furthermore, the opening force and the leakage flux are proved to be strongly correlated with the operating parameters. Then, the function-coupling method is introduced to analyze the numerical results to obtain the correlation formulae of the opening force and leakage flux respectively with the operating parameters, i.e., the inlet pressure and the rotating speed. This study intends to provide an effective way to predict the aerodynamic performance for designing and optimizing the groove styles in dry gas seal rapidly and accurately.

This paper shows that a turned trochoidal function disturbance may lead to peripheral drops production. The resulting model is used to describe that a turned trochoidal disturbance leads to peripheral drops production on the liquid jet surface without the necessity for superimposed disturbances. The trochoid is a non-unique parametric function. Only non-unique parametric functions disturbances may lead to peripheral drops production. The trochoidal function disturbance is decomposed to Fourier series. Every Fourier element receives an amplification factor in accordance to the Rayleigh inviscid jet model. Peripheral drops are received on the jet surface. The paper shows that all trochoidal disturbance functions, prolate cycloid, cycloid and curtate cycloid have a capability of peripheral drops producing. A limited capability of peripheral drops production is introduced for the trochoidal curtate cycloid. Produced drops size are reduced for increasing the jet velocity and wave number. Smaller drops are also received by transition from the prolate cycloid to curtate cycloid disturbance.

Strengthening and toughening mechanisms in composite ceramics is complex. A change in a single parameter induces multiple property variations. The multiple changes in properties are often incompletely represented in theoretical models. This incompleteness in the parameter chosen fails to explain the mechanism of failure in composite ceramics. The exponential toughness function is used to represent the pull-out toughening mechanism, which dominates the crack growth resistance curve(R-curve). The strengthening-toughening model is established based on the Mori-Tanaka method(M-T method). The influence of inherent defects on toughness function and strength is analyzed by using this model. The theoretical result is compared with the experiment data. This model exactly reflects the change in strength. The theoretical result indicates that defects change the toughness function. Moreover, micro-cracks increase toughness size ac, and the strength of crack instable extensions acutely decreases as defect content increases. This presented model establishes the relationship among the important mechanical parameters of defect, strength, elastic modulus, and the R-curve.

Dual mechanical port machine(DMPM), as a novel electromechanical energy conversion device, has attracted widespread attention. DMPM with spoke type permanent magnet arrangements(STPM-DMPM), which is one of several types of DMPM, has been of interest recently. The unique coupling characteristics of STPM-DMPM are beneficial to improving system performance, but these same characteristics increase the difficulties of control. Now there has been little research about the control of STPM-DMPM, and this has hindered its practical application. Based on a mathematical model of STPM-DMPM, the coupling characteristics and the merits and demerits of such devices are analyzed as applied to a hybrid system. The control strategies for improving the disadvantages and for utilizing the advantage of coupling are researched. In order to weaken the interaction effect of torque outputs in the inner motor and the outer motor that results from coupling in STPM-DMPM, a decoupling control method based on equivalent current control is proposed, and independent torque control for the inner motor and outer motor is achieved. In order to solve address the problem of adequately utilization of coupling, minimizing the overall copper loss of the inner motor and the outer motor of STPM-DMPM is taken as the optimization objective for optimal control, and the purpose of utilizing the coupling adequately and reasonably is achieved. The verification tests of the proposed decoupling control and optimal control strategies are carried out on a prototype STPM-DMPM, and the experimental results show that the interaction effect of torque outputs in the inner motor and the outer motor can be markedly weakened through use of the control method. The overall copper loss of the inner motor and the outer motor can be markedly reduced through use of the optimal control method, while the power output remains unchanged. A breakthrough in the control problem of STPM-DMPM is accomplished by combining the control methods. Good performance in the control of STPM-DMPM will enhance its practicality, particularly as applied to hybrid systems.

目的 探讨严格液体管理对重症肺部感染患者心肺保护作用及其可能的机制.方法 将157例重症肺部感染患者随机分为液体管理组和对照组,用脉搏指示连续心输出量监测(PiCCO)的方法检测血流动力学变化指标[心输出量(CO)、心指数(CI)、胸腔内血管容量( ITBVI)、血管外肺水(EVLWI)]并指导液体管理;实验前后测定患者血浆脑型利钠肽(BNP),评估液体管理对患者心功能的影响;测定纤支镜肺灌洗液中白细胞介素(IL)-6的浓度,以评估肺组织局部炎症情况,监测动脉血气分析;实验前后行胸部CT检查评价肺部病变恢复情况.结果 与对照组比较,液体管理组血浆脑型利钠肽、血流动力学指标( CO、CI、EVLWI)和肺组织局部IL-6水平均明显下降(P<0.05),动脉血气氧分压升高(P<0.05),肺泡-动脉氧分压差下降(P<0.05),肺部病变和肺功能明显改善.结论 积极液体管理可保护重症肺部感染患者的心肺功能,其原因可能与降低炎症反应及改善氧合有关.

湿地自由水面巨大的水汽蒸发及其茂密植被的水汽蒸腾进入到大气中,然后又以雨的形式降到周围的地区,使得湿地和大气之间不断地进行着能量和物质交换,从而保持当地的湿度和降水量.该文根据衡水湖周边24个雨量站1974年-2009年的降水资料,分别计算出湖区、10km半径影响区、10-20km环形影响区、20~30km环形影响区的平均降水量,并按不同年代进行对比分析,揭示了衡水湖湿地对周边区域气候调节作用.

As a promising technique, surrogate-based design and optimization(SBDO) has been widely used in modern engineering design optimizations. Currently, static surrogate-based optimization methods have been successfully applied to expensive optimization problems. However, due to the low efficiency and poor flexibility, static surrogate-based optimization methods are difficult to efficiently solve practical engineering cases. At the aim of enhancing efficiency, a novel surrogate-based efficient optimization method is developed by using sequential radial basis function(SEO-SRBF). Moreover, augmented Lagrangian multiplier method is adopted to solve the problems involving expensive constraints. In order to study the performance of SEO-SRBF, several numerical benchmark functions and engineering problems are solved by SEO-SRBF and other well-known surrogate-based optimization methods including EGO, MPS, and IARSM. The optimal solutions, number of function evaluations, and algorithm execution time are recorded for comparison. The comparison results demonstrate that SEO-SRBF shows satisfactory performance in both optimization efficiency and global convergence capability. The CPU time required for running SEO-SRBF is dramatically less than that of other algorithms. In the torque arm optimization case using FEA simulation, SEO-SRBF further reduces 21% of the material volume compared with the solution from static-RBF subject to the stress constraint. This study provides the efficient strategy to solve expensive constrained optimization problems.

CAD model retrieval based on functional semantics is more significant than content-based 3D model retrieval during the mechanical conceptual design phase. However, relevant research is still not fully discussed. Therefore, a functional semantic-based CAD model annotation and retrieval method is proposed to support mechanical conceptual design and design reuse, inspire designer creativity through existing CAD models, shorten design cycle, and reduce costs. Firstly, the CAD model functional semantic ontology is constructed to formally represent the functional semantics of CAD models and describe the mechanical conceptual design space comprehensively and consistently. Secondly, an approach to represent CAD models as attributed adjacency graphs(AAG) is proposed. In this method, the geometry and topology data are extracted from STEP models. On the basis of AAG, the functional semantics of CAD models are annotated semi-automatically by matching CAD models that contain the partial features of which functional semantics have been annotated manually, thereby constructing CAD Model Repository that supports model retrieval based on functional semantics. Thirdly, a CAD model retrieval algorithm that supports multi-function extended retrieval is proposed to explore more potential creative design knowledge in the semantic level. Finally, a prototype system, called Functional Semantic-based CAD Model Annotation and Retrieval System(FSMARS), is implemented. A case demonstrates that FSMARS can successfully botain multiple potential CAD models that conform to the desired function. The proposed research addresses actual needs and presents a new way to acquire CAD models in the mechanical conceptual design phase.

目的 采用高频率超声影像技术方法观察急性心肌梗死大鼠心功能变化.方法 用冠状动脉结扎法建立心肌梗死大鼠模型,采用高频率超声影像系统测量左心室舒张末期前壁厚度(LVAWd)与后壁厚度( LVPWd)、舒张末期(LVIDd)和收缩末期左室内径(LVlDs),计算舒张末期和收缩末期左室容积(LVEDV,LVESV),射血分数(EF)、短轴缩短率(FS)、每搏输出量(SV).同时对梗死心肌组织进行定量检查,并检测血清中肌酸激酶(CK)、乳酸脱氢酶(LDH)、超氧化物歧化酶(SOD)、丙二醛(MDA)等生化指标,进一步证实超声影像评价小动物心脏功能的可行性和准确性.结果 模型组与正常组、假手术组比较,LVIDs,LVESV,EF、FS、SV有显著性差异(P<0.01).心肌梗死面积有极显著性差异(P<0.01).模型组与正常组比较,CK、LDH值明显升高,有极显著性差异(P<0.01).MDA值明显升高,有极显著性差异(P<0.01).结论 高频率超声影像对大鼠心脏功能的评价有较高的准确性,可以作为大鼠心梗模型实验研究中可选择的无创性心功能评价技术之一.

采用废旧聚乙烯(PE)与硫酸钙晶须为原料,通过熔融挤出共混制得废旧PE/硫酸钙晶须复合材料,比较了经硅烷偶联剂KH-590改性与未改性的硫酸钙晶须用量对废旧PE/硫酸钙晶须复合材料力学性能的影响,分析硫酸钙晶须增强度旧PE的机理和废旧PE/硫酸钙晶须复合材料的微观结构.结果表明:当硫酸钙晶须用量为15%时,未改性硫酸钙晶须使复合材料的拉伸强度、冲击强度提高了23.1%、9.1%;改性硫酸钙晶须使复合材料的拉伸强度、冲击强度、弯曲强度提高了26.7%、15.6%和5 3%,其在废旧PE中分布均匀,能起到明显的增强作用.