科创中国

Direct drive servovalves are mostly restricted to low flow rate and low bandwidth applications due to the considerable flow forces.Current studies mainly focus on enhancing the driving force,which in turn is limited to the development of the magnetic material.Aiming at reducing the flow forces,a novel rotary direct drive servovalve(RDDV)is introduced in this paper.This RDDV servovalve is designed in a rotating structure and its axially symmetric spool rotates within a certain angle range in the valve chamber.The servovalve orifices are formed by the matching between the square wave shaped land on the spool and the rectangular ports on the sleeve.In order to study the RDDV servovalve performance,flow rate model and mechanical model are established,wherein flow rates and flow induced torques at different spool rotation angles or spool radiuses are obtained.The model analysis shows that the driving torque can be alleviated due to the proposed valve structure.Computational fluid dynamics(CFD)analysis using ANSYS/FLUENT is applied to evaluate and validate the theoretical analysis.In addition,experiments on the flow rate and the mechanical characteristic of the RDDV servovalve are carried out.Both simulation and experimental results conform to the results of the theoretical model analysis,which proves that this novel and innovative structure for direct drive servovalves can reduce the flow force on the spool and improve valve frequency response characteristics.This research proposes a novel rotary direct drive servovalve,which can reduce the flow forces effectively.

With the increasing noise pollution,low noise optimization of centrifugal pimps has become a hot topic.However,experimental study on this problem is unacceptable for industrial applications due to unsustainable cost.A hybrid method that couples computational fluid dynamics(CFD)with computational aeroacoustic software is used to predict the flow-induced noise of pumps in order to minimize the noise of centrifugal pumps in actual projects.Under Langthjem's assumption that the blade surface pressure is the main flow-induced acoustic source in centrifugal pumps,the blade surface pressure pulsation is considered in terms of the acoustical sources and simulated using CFX software.The pressure pulsation and noise distribution in the near-cutoff region are examined for the blade-passing frequency(BPF)noise,and the sound pressure level(SPL)reached peaks near the cutoff that corresponded with the pressure pulsation in this region.An experiment is performed to validate this prediction.Four hydrophones are fixed to the inlet and outlet ports of the test pump to measure the flow-induced noise from the four-port model.The simulation results for the noise are analyzed and compared with the experimental results.The variation in the calculated noise with changes in the flow agreed well with the experimental results.When the flow rate was increased,the SPL first decreased and reached the minimum near the best efficient point(BEP);it then increased when the flow rate was further increased.The numerical and experimental results confirmed that the BPF noise generated by a blade-rotating dipole roughly reflects the acoustic features of centrifugal pumps.The noise simulation method in current study has a good feasibility and suitability,which could be adopted in engineering design to predict and optimize the hydroacoustic behavior of centrifugal pumps.

In the mixed-flow pump design,the shape of the flow passage can directly affect the flow capacity and the internal flow,thus influencing hydraulic performance,cavitation performance and operation stability of the mixed-flow pump.However,there is currently a lack of experimental research on the influence mechanism.Therefore,in order to analyze the effects of subtle variations of the flow passage on the mixed-flow pump performance,the frustum cone surface of the end part of inlet contraction flow passage of the mixed-flow pump is processed into a cylindrical surface and a test rig is built to carry out the hydraulic performance experiment.In this experiment,parameters,such as the head,the efficiency,and the shaft power,are measured,and the pressure fluctuation and the noise signal are also collected.The research results suggest that after processing the inlet flow passage,the head of the mixed-flow pump significantly goes down;the best efficiency of the mixed-flow pump drops by approximately 1.5%,the efficiency decreases more significantly under the large flow rate;the shaft power slightly increases under the large flow rate,slightly decreases under the small flow rate.In addition,the pressure fluctuation amplitudes on both the impeller inlet and the diffuser outlet increase significantly with more drastic pressure fluctuations and significantly lower stability of the internal flow of the mixed-flow pump.At the same time,the noise dramatically increases.Overall speaking,the subtle variation of the inlet flow passage leads to a significant change of the mixed-flow pump performance,thus suggesting a special attention to the optimization of flow passage.This paper investigates the influence of the flow passage variation on the mixed-flow pump performance by experiment,which will benefit the optimal design of the flow passage of the mixed-flow pump.

The current design of hydro-viscous clutch(HVC)in tracked vehicle fan transmission mainly focuses on high-speed and high power.However,the fluid torque under the influence of fluid temperature can not be predicted accurately by conventional mathematical model or experimental research.In order to validate the fluid torque of HVC by taking the viscosity-temperature characteristic of fluid into account,the test rig is designed.The outlet oil temperature is measured and fitted with different rotation speed,oil film thickness,oil flow rate,and inlet oil temperature.Meanwhile,the film torque can be obtained.Based on Navier-Stokes equations and the continuity equation,the mathematical model of fluid torque is proposed in cylindrical coordinate.Iterative method is employed to solve the equations.The radial and tangential speed distribution,radial pressure distribution and theoretical flow rate are determined and analyzed.The models of equivalent radius and fluid torque of friction pairs are introduced.The experimental and theoretical results indicate that tangential speed distribution is mainly determined by the relative rotating speed between the friction plate and the separator disc.However,the radial speed distribution and pressure distribution are dominated by pressure difference at the lower rotating speed.The oil film fills the clearance and the film torque increases with increasing rotating speed.However,when the speed reaches a certain value,the centrifugal force will play an important role on the fluid distribution.The pressure is negative at the outer radius when inlet flow rate is less than theoretical flow,so the film starts to shrink which decreases the film torque sharply.The theoretical fluid torque has good agreement with the experimental data.This research proposes a new fluid torque mathematical model which may predict the film torque under the influence of temperature more accurately.

南水北调中线天津干线采用全箱涵无压接有压自流输水方案,调节池是实现无压流和有压流平稳过渡的重要控制性建筑物.经多方案比选,斜坡式调节池结构安全稳定,水力条件好,实现了上下游流态的平稳衔接.

浙江是原始瓷的重要产地,德清火烧山窑址是目前已知的唯一一处西周晚期至春秋晚期的原始瓷窑址,也是目前已发掘最早的纯烧原始瓷的窑址,对于探索中国早期青瓷的烧造技术具有极其重要的意义.选取早期(西周晚期到春秋初期)样品18个,中后期(春秋中期后段)样品15个,晚期(春秋晚期后段)样品17个,进行质子激发X射线荧光(Proton Induced X-ray Emission,PIXE)分析.因子分析用来研究这些不同时期烧造的原始瓷原料来源和相互关系.结果表明,晚期产品所用胎料、釉料与早期产品不同,与中后期产品相同.

Existing researches on no-moving part valves in valve-less piezoelectric pumps mainly concentrate on pipeline valves and chamber bottom valves,which leads to the complex structure and manufacturing process of pump channel and chamber bottom.Furthermore,position fixed valves with respect to the inlet and outlet also makes the adjustability and controllability of flow rate worse.In order to overcome these shortcomings,this paper puts forward a novel implantable structure of valve-less piezoelectric pump with hemisphere-segments in the pump chamber.Based on the theory of flow around bluff-body,the flow resistance on the spherical and round surface of hemisphere-segment is different when fluid flows through,and the macroscopic flow resistance differences thus formed are also different.A novel valve-less piezoelectric pump with hemisphere-segment bluff-body(HSBB)is presented and designed.HSBB is the no-moving part valve.By the method of volume and momentum comparison,the stress on the bluff-body in the pump chamber is analyzed.The essential reason of unidirectional fluid pumping is expounded,and the flow rate formula is obtained.To verify the theory,a prototype is produced.By using the prototype,experimental research on the relationship between flow rate,pressure difference,voltage,and frequency has been carried out,which proves the correctness of the above theory.This prototype has six hemisphere-segments in the chamber filled with water,and the effective diameter of the piezoelectric bimorph is 30mm.The experiment result shows that the flow rate can reach 0.50 mL/s at the frequency of 6 Hz and the voltage of 110 V.Besides,the pressure difference can reach 26.2 mm H2O at the frequency of 6 Hz and the voltage of 160 V.This research proposes a valve-less piezoelectric pump with hemisphere-segment bluff-body,and its validity and feasibility is verified through theoretical analysis and experiment.

The transient behavior of centrifugal pumps during transient operating periods,such as startup and stopping,has drawn more and more attention recently because of urgent needs in engineering.Up to now,almost all the existing studies on this behavior are limited to using water as working fluid.The study on the transient behavior related to solid-liquid two-phase flow has not been seen yet.In order to explore the transient characteristics of a high specific-speed centrifugal pump during startup period delivering the pure water and solid-liquid two-phase flow,the transient flows inside the pump are numerically simulated using the dynamic mesh method.The variable rotational speed and flow rate with time obtained from experiment are best fitted as the function of time,and are written into computational fluid dynamics(CFD)code-FLUENT by using a user defined function.The predicted heads are compared with experimental results when pumping pure water.The results show that the difference in the transient performance during startup period is very obvious between water and solid-liquid two-phase flow during the later stage of startup process.Moreover,the time for the solid-liquid two-phase flow to achieve a stable condition is longer than that for water.The solid-liquid two-phase flow results in a higher impeller shaft power,a larger dynamic reaction force,a more violent fluctuation in pressure and a reduced stable pressure rise comparing with water.The research may be useful to understanding on the transient behavior of a centrifugal pump under a solid-liquid two-phase flow during startup period.

To improve the performance of the positive displacement blower,it is imperative to understand the detailed internal flow characteristics or enable a visualization of flow status.However,the existing two-dimensional unsteady,three-dimensional steady or quasi-unsteady numerical simulation and theoretical analysis cannot provide the detailed flow information,which is unfavorable to improve the performance of positive displacement blower.Therefore,the unsteady flow characteristics in a three-lobe positive displacement blower are numerically investigated by solving the three-dimensional,unsteady,compressible Navier-Stokes equations coupled with RNG k-εturbulent model.In the numerical simulation,the dynamic mesh technique and overset mesh updating method are adopted.Due to the air being compressed in the process of the rotors rotating,the variation of the temperature field in the positive displacement blower is considered.By comparing the experimental measurements and the numerical results on the variation of flow rate with the outlet pressure,the maximum relative error of the flow rate is less than 2.15%even at the maximum outlet pressure condition,which means that the calculation model and numerical computational method used are effective.The numerical results show that in the intake region,the fluctuations of the inlet flow are greatly affected by the direction of the velocity vectors.In the exhaust region,the temperature changes significantly,which leads to the increase of the airflow pulsation.Through analysis on the velocity,pressure and temperature fields obtained from the numerical simulations,three-dimensional unsteady flow characteristics in the positive displacement blower are revealed.The studied results will provide useful reference for improving the performance and empirical correction in the design of the positive displacement blower.

声学多普勒水流剖面仪是目前较先进的河道测流设备.按《规范》要求,利用该仪器前,需要对该仪器与流速仪测流的实测流量进行对比实验,计算其换算系数.在分析ADCP测流原理的基础上,利用引黄干渠张二庄水文站实测流量资料,对两种测流方法测量结果进行对比分析.根据最小二乘法原理,建立回归直线,并对其进行检验.对回归直线进行拟合优度检验,拟合优度系数为0.982;对回归直线用F检验法进行截距检验,回归效果显著.在该断面用ADCP测流时,流量换算系数为0.9911.