科创中国

Further development of the photovoltaic industry is restricted by the productivity of mono-crystalline silicon technology due to its requirements of low cost and high efficient photocells.The heat shield is not only the important part of the thermal field in Czochralski(Cz)mono-crystalline silicon furnace,but also one of the most important factors influencing the silicon crystal growth.Large-diameter Cz-Si crystal growth process is taken as the study object.Based on FEM numerical simulation,different heat shield structures are analyzed to investigate the heater power,the melt-crystal interface shape,the argon flow field,and the oxygen concentration at the melt-crystal interface in the process of large Cz-Si crystal growth.The impact of these factors on the growth efficiency and crystal quality are analyzed.The results show that the oxygen concentration on the melt-crystal interface and the power consumption of the heater stay high due to the lack of a heat shield in the crystal growth system.Argon circumfluence is generated on the external side of the right angle heat shield.By the right-angle heat shield,the speed of gas flow is lowered on the melt free surface,and the temperature gradient of the free surface is increased around the melt-crystal interface.It is not conducive for the stable growth of crystal.The shape of the melt-crystal interface and the argon circulation above the melt free surface are improved by the inclined heat shield.Compared with the others,the system pulling rate is increased and the lowest oxygen concentration is achieved at the melt-crystal interface with the composite heat shield.By the adoption of the optimized composite heat shield in experiment,the real melt-crystal interface shapes and its deformation laws obtained by Quick Pull Separation Method at different pulling rates agree with the simulation results.The results show that the method of simulation is feasible.The proposed research provides the theoretical foundation for the thermal field design of the large diameter Cz-Si monocrystalline growth.

In piezoceramic ultrasonic devices,the piezoceramic stacks may fail permanently or function improperly if their working temperatures overstep the Curie temperature of the piezoceramic material.While the end of the horn usually serves near the melting point of the molten metal and is enclosed in an airtight chamber,so that it is difficult to experimentally measure the temperature of the transducer and its variation with time,which bring heavy difficulty to the design of the ultrasonic molten metal treatment system.To find a way out,conjugate heat transfer analysis of an ultrasonic molten metal treatment system is performed with coupled fluid and heat transfer finite element method.In modeling of the system,the RNG model and the SIMPLE algorithm are adopted for turbulence and nonlinear coupling between the momentum equation and the energy equation.Forced air cooling as well as natural air cooling is analyzed to compare the difference of temperature evolution.Numerical results show that,after about 350 s of working time,temperatures in the surface of the ceramic stacks in forced air cooling drop about 7 K compared with that in natural cooling.At 240 s,The molten metal surface emits heat radiation with a maximum rate of about 19 036 W/m2,while the heat insulation disc absorbs heat radiation at a maximum rate of about 7922 W/m2,which indicates the effectiveness of heat insulation of the asbestos pad.Transient heat transfer film coefficient and its distribution,which are difficult to be measured experimentally are also obtained through numerical simulation.At 240 s,the heat transfer film coefficient in the surface of the transducer ranges from–17.86 to 20.17 W/(m2?K).Compared with the trial and error method based on the test,the proposed research provides a more effective way in the design and analysis of the temperature control of the molten metal treatment system.

抽汽压损是一种不明显的热力损失,使蒸汽的作功能力下降、热经济性降低.假定抽汽口的压力不变,加热器端差不变,分析抽汽压损变化对热力系统的影响.根据抽汽压损的理论分析和热力系统汽水分布方程建立抽汽压损对回热系统抽汽系数影响的数学模型,并结合炯平衡原理和小扰动理论建立抽汽压损对炯损分布的影响的数学模型.以某电厂N1000-25/600/600机组热力系统为例,在TRL工况下,定量计算热力系统炯损变化情况.根据定量计算结果定性分析了抽汽压损对热力系统的影响.