科创中国

Compared with the traditional non-cutting measurement,machining tests can more accurately reflect the kinematic errors of five-axis machine tools in the actual machining process for the users.However,measurement and calculation of the machining tests in the literature are quite difficult and time-consuming.A new method of the machining tests for the trunnion axis of five-axis machine tool is proposed.Firstly,a simple mathematical model of the cradle-type five-axis machine tool was established by optimizing the coordinate system settings based on robot kinematics.Then,the machining tests based on error-sensitive directions were proposed to identify the kinematic errors of the trunnion axis of cradle-type five-axis machine tool.By adopting the error-sensitive vectors in the matrix calculation,the functional relationship equations between the machining errors of the test piece in the error-sensitive directions and the kinematic errors of C-axis and A-axis of five-axis machine tool rotary table was established based on the model of the kinematic errors.According to our previous work,the kinematic errors of C-axis can be treated as the known quantities,and the kinematic errors of A-axis can be obtained from the equations.This method was tested in Mikron UCP600 vertical machining center.The machining errors in the error-sensitive directions can be obtained by CMM inspection from the finished test piece to identify the kinematic errors of five-axis machine tool trunnion axis.Experimental results demonstrated that the proposed method can reduce the complexity,cost,and the time consumed substantially,and has a wider applicability.This paper proposes a new method of the machining tests for the trunnion axis of five-axis machine tool.

The compliance modeling and rigidity performance evaluation for the lower mobility parallel manipulators are still to be remained as two overwhelming challenges in the stage of conceptual design due to their geometric complexities. By using the screw theory, this paper explores the compliance modeling and eigencompliance evaluation of a newly patented 1T2R spindle head whose topological architecture is a 3-RPS parallel mechanism. The kinematic definitions and inverse position analysis are briefly addressed in the first place to provide necessary information for compliance modeling. By considering the 3-RPS parallel kinematic machine(PKM) as a typical compliant parallel device, whose three limb assemblages have bending, extending and torsional deflections, an analytical compliance model for the spindle head is established with screw theory and the analytical stiffness matrix of the platform is formulated. Based on the eigenscrew decomposition, the eigencompliance and corresponding eigenscrews are analyzed and the platform's compliance properties are physically interpreted as the suspension of six screw springs. The distributions of stiffness constants of the six screw springs throughout the workspace are predicted in a quick manner with a piece-by-piece calculation algorithm. The numerical simulation reveals a strong dependency of platform's compliance on its configuration in that they are axially symmetric due to structural features. At the last stage, the effects of some design variables such as structural, configurational and dimensional parameters on system rigidity characteristics are investigated with the purpose of providing useful information for the structural design and performance improvement of the PKM. Compared with previous efforts in compliance analysis of PKMs, the present methodology is more intuitive and universal thus can be easily applied to evaluate the overall rigidity performance of other PKMs with high efficiency.

Parallel kinematic machines have drawn considerable attention and have been widely used in some special fields.However,high precision is still one of the challenges when they are used for advanced machine tools.One of the main reasons is that the kinematic chains of parallel kinematic machines are composed of elongated links that can easily suffer deformations,especially at high speeds and under heavy loads.A 3-RRR parallel kinematic machine is taken as a study object for investigating its accuracy with the consideration of the deformations of its links during the motion process.Based on the dynamic model constructed by the Newton-Euler method,all the inertia loads and constraint forces of the links are computed and their deformations are derived.Then the kinematic errors of the machine are derived with the consideration of the deformations of the links.Through further derivation,the accuracy of the machine is given in a simple explicit expression,which will be helpful to increase the calculating speed.The accuracy of this machine when following a selected circle path is simulated.The influences of magnitude of the maximum acceleration and external loads on the running accuracy of the machine are investigated.The results show that the external loads will deteriorate the accuracy of the machine tremendously when their direction coincides with the direction of the worst stiffness of the machine.The proposed method provides a solution for predicting the running accuracy of the parallel kinematic machines and can also be used in their design optimization as well as selection of suitable running parameters.