科创中国

As one of the most wear monitoring indicator, dimensional feature of individual particles has been studied mostly focusing on off-line analytical ferrograph. Recent development in on-line wear monitoring with wear debris images shows that merely wear debris concentration has been extracted from on-line ferrograph images. It remains a bottleneck of obtaining the dimension of on-line particles due to the low resolution, high contamination and particle's chain pattern of an on-line image sample. In this work, statistical dimension of wear debris in on-line ferrograph images is investigated. A two-step procedure is proposed as follows. First, an on-line ferrograph image is decomposed into four component images with different frequencies. By doing this, the size of each component image is reduced by one fourth, which will increase the efficiency of subsequent processing. The low-frequency image is used for extracting the area of wear debris, and the high-frequency image is adopted for extracting contour. Second, a statistical equivalent circle dimension is constructed by equaling the overall wear debris in the image into equivalent circles referring to the extracted total area and premeter of overall wear debris. The equivalent circle dimension, reflecting the statistical dimension of larger wear debris in an on-line image, is verified by manual measurement. Consequently, two preliminary applications are carried out in gasoline engine bench tests of durability and running-in. Evidently, the equivalent circle dimension, together with the previously developed concentration index, index of particle coverage area(IPCA), show good performances in characterizing engine wear conditions. The proposed dimensional indicator provides a new statistical feature of on-line wear particles for on-line wear monitoring. The new dimensional feature conveys profound information about wear severity.

目的通过对安格尔Ⅱ类1分类错胎临界病例正畸前后的牙胎模型同行评估等级(PAR)指数分析,评估这类患儿拔牙与否的正畸治疗效果,为临床医师制定矫治计划提供参考.方法选择83例平均年龄(12.6±1.1)岁的安格尔Ⅱ类1分类错胎临界病例为研究对象,其中拔牙57例,非拔牙26例,应用PAR指数对其治疗前后的牙胎模型进行评分,比较拔牙组与非拔牙组矫治前后错胎的分值变化,进而评估两组正畸治疗的效果.结果安格尔Ⅱ类1分类错验临界病例不论拔牙与否,治疗后的加权PAR指数总分均较治疗前明显减小,加权PAR指数减少率均大于70%,且两组之间的加权PAR指数总分差异无统计学意义;治疗效果明显改善者为96.39%(80/83).结论安格尔Ⅱ类1分类错胎临界病例拔牙与否,均可在牙胎关系方面收到较好的治疗效果.

针对当前基于自然特征的增强现实效率低,提出一种新的基于ORB自然特征的实时注册方法.提取视频帧与基准图像中的ORB特征点,使用汉明距离匹配,利用RANSAC算法筛选得到最佳匹配点对,确定摄像机的位姿.将三维虚拟物体叠加到真实场景中,达到虚实结合的效果.实验表明,在不同尺度角度、一定环境光变化、复杂背景和基准图像部分遮挡的情况下,该AR系统都具有良好的性能,跟踪定位准确度高,速度基本达到实时要求

针对物流信息平台中信息资源采集系统建设的不足,提出建立基于Nutch的网页资源定向采集系统,并对中文分词、主题相关度分析、结果排序、正文解析等关键模块进行重点探讨.最后在一定条件下进行了实验,并分析了实验结果.

衡水市水功能区一级功能区共涉及25个,二级功能区共涉及23个.为加强水功能区保护和管理,结合当地实际情况,共在10处重点水功能区常设12处水质监测断面.通过对多年监测数据分析,功能区受点源、面源污染以及上游下泄污水等因素影响,水质污染较重,达标率较低,2010年仅为20%.针对境内自产入河污染物,对照河流纳污能力,消减任务最重的是滏阳河衡水景观娱乐用水区段.降低污染,恢复水体功能任务艰巨,依据现有条件,可积极寻求开发污水再生利用、消减面源污染等途径,以实现水生态良性循环.

抽汽压损是一种不明显的热力损失,使蒸汽的作功能力下降、热经济性降低.假定抽汽口的压力不变,加热器端差不变,分析抽汽压损变化对热力系统的影响.根据抽汽压损的理论分析和热力系统汽水分布方程建立抽汽压损对回热系统抽汽系数影响的数学模型,并结合炯平衡原理和小扰动理论建立抽汽压损对炯损分布的影响的数学模型.以某电厂N1000-25/600/600机组热力系统为例,在TRL工况下,定量计算热力系统炯损变化情况.根据定量计算结果定性分析了抽汽压损对热力系统的影响.

建立了蔬菜干制品中18种有机磷农药和拟除虫菊酯农药残留的在线凝胶渗透色谱一气相色谱/质谱(GPC-GC/MS)分析方法.样品以乙腈为提取剂超声波高速匀浆提取,提取液经ENVI.Carb固相萃取柱净化,除去样品中大部分的色素等干扰基质,再经在线GPC进一步净化除去大分子干扰物质,有效降低了样品基质带来的背景干扰.采用外标法定量,在质量浓度为0.02mg/kg,-0.5mg/kg有良好的线性关系,加标水平为0.4mg/kg时,18种农药的回收率基本都在80%-130%,相对标准偏差小于10%,检出限为0.001mg/kg-0.026mg/kg.经实验证明,该方法是一种快速,准确,灵敏度高的同时检测梅菜干中多种农药残留的检测方法.